
SERVICES | BLANTYRE, GLASGOW
Clean it Well. Treat it Right.
Protect it Properly.
One workshop, countless methods.
Dry Ice, Blasting Media & Vapour Blasting, Laser Removal through to high quality paint & long-term rust proofing.
We inspect first, then pick the right tool for what's actually underneath your car.
NO ONE-SIZE-FITS-ALL
We use the right tool for the right job, because no two undersides are the same.
A track-day Evo, a daily-driven work van, & a 1970's classic all corrode differently & need different tools to fix it. That's why every vehicle is carefully inspected with the customer before we recommend a method before not after.
Whether that means simple cleaning or severe corrosion removal the goal is the same: a clean, stable surface that rust proofing can actually bond to.
THE PROCESS
Five Stages. No Shortcuts
INSPECT
Full underbody assessment before anything starts
CLEAN
Steam & pressure washing lift heavy dirt & grease
STRIP
Laser, dry ice, media...
We match it to the job
TREAT
Rust Inhibitors & high quality Primers and Paints stabilise bare metal.
PROTECT
Multi-layer preservation coatings & corrosion preventio.
OUR ARSENAL
The Right Tool For The Right Job
01 // LASER
LASER ABLATION
Pinpoint rust removal. No media, no mess, minimal disruption to the surface around it.
03 // MEDIA
MEDIA BLASTING
Glass-bead blasting for thick underseal, stubborn coatings and heavier corrosion.
02 // DRY ICE
DRY ICE BLASTING
Non-abrasive, chemical-free. Strips grime & old coatings without touching sound metal underneath.
04 // VAPOUR
VAPOUR BLASTING
Wet-media process that restores oxidised alloy and delicate components to a clean, even finish.
05 // STEAM PRESSURE
STEAM PRESSURE WASH
High-temperature steam cuts through caked-on mud, oil & road grease before any treatment.
06 // CO2
CO2 CLEANING
Dry, residue-free cleaning that's safe on electrical components, cosmetic paints, & sensitive engine parts.
07 // WALNUT / MICRO BLAST
WALNUT BLASTING
Soft, organic media that lifts grime and light corrosion without marking delicate trim or fittings.
08 // BRISTLE
BRISTLE BLASTING
Targets old paint & coatings by attacking them from the surface, leaving sound metal untouched.
BUILT FOR SCOTTISH ROADS
Coatings & Layers
Underbody protection isn't one size fits all.
We choose every system based on your vehicle's condition, how it's used and its level of corrosion risk.
Every job layers rust treatment, flexible primers and paints, and a finishing coat of corrosion protections built to handle salt, grit, moisture and everything else Scottish roads throw at it.



01 // BASE LAYER
Clean, Treated Metal
Every coating starts with a perfectly clean and stable surface. After blasting and rust treatment, we make sure every inch of the underside is free from moisture and oils. This is critical, because everything applied afterwards only lasts if it's bonded to clean, stable metal.
Any welding required on your vehicle is done at this stage, without leaving our workshop.
02 // PRIMER
Epoxy Primer
A high build epoxy primer is applied next. It seals the treated metal, gives everything above it something solid to key into, and adds an extra barrier against moisture before the finish goes on.
03 // CHASSIS PAINT
Marine Grade Paints
We then apply a durable paint selected for the specific needs and use of your vehicle, most commonly in black for a factory fresh finish. Where a specific colour is wanted we'll get as close a match as we can for a show-ready finish.
04 // STONECHIP
Stonechip Protection
A textured stonechip coating goes over the paint on areas that take the most road debris, wheel arches, sills & the lower chassis. It absorbs the impact from stones & grit so the layers underneath stay intact.
06 // FINISH
Lanolin / Waxoyl Finish
Finally we apply a lanolin or Waxoyl underseal over the top, built to resist:
-
Salt and grit corrosion
-
Road debris impact
-
Temperature changes and moisture build up
This flexible, self healing layer seeps into seams & cavities, repelling salt & moisture long after the paint & stonechip are cured. It finishes the system with a barrier that can be topped up annually rather than redone from scratch.
Once complete, maintenance is simple. An annual check and a lanolin top up is usually all it takes to keep the whole system sealed for years to come.
WHY IT'S WORTH IT
The Benefits of Underbody Protection
A properly protected underside does more than improve appearance.
It helps preserve the structure, safety and long-term value of the vehicle.
Extends the lifespan of suspension & brake components
Boosts resale value by proving proper care & reducing risk of an MOT fail
Helps prevent costly welding or chassis repairs
Keeps your car structurally sound for longer
Whether it's a daily driver, classic or weekend toy...
From the busy streets of Glasgow & Edinburgh, to the salt-covered roads of the Highlands & NC500, we help protect cars across Scotland from rust, corrosion and winter wear.
Still not sure which method or coating is right for your car?
Every vehicle's different, and it's not always obvious whether you need dry ice or vapour, or a full protection system versus a quick clean. Check out our recent blogs for real jobs, breakdowns of each method, and honest advice on what's actually worth doing.
_edited.jpg)


